development will consist of the installation of a Flue Dust Portland Cement Silo at Kiln 3. The development will include the provision of a silo of circa 40m in height and 12m in diameter, together with filter, access gantries, bucket elevator and truck loading facility all on an application site of circa 0.75 hectares located within Platin Cement Works. This application relates to an activity for which an Industrial Emissions Licence applies under the Environmental Protection Acts 1992 as amended. (IE Licence Register Number P0030-04) (Screening for Appropriate Assessment)
Development Address:
Platin Cement Works, Platin, County Meath
Architect Name:
Brady Shipman Martin
Location Key:
PLATIN
Electoral Division:
Incorrect Icl Voter Recor
Planner:
None
Social Housing Exempt:
Plan Enforcement #:
IPC
Licence Required:
No
Waste Licence Required:
No
Protected Structure:
No
Protected Structure #:
Development Name:
Proposed Development
Comments
Significant Case Flag:
Comments:
Decision
Decision Date:
03/06/2015
Manager Order:
L617/15
Decision Type:
Conditional
Number of Conditions:
7
Grant Date:
09/07/2015
Grant Managers Order #:
Section 47
Apply?:
Part 5
Apply?:
Expiry Date:
30/06/2025
Decision Description:
development will consist of the installation of a Flue Dust Portland Cement Silo at Kiln 3. The development will include the provision of a silo of circa 40m in height and 12m in diameter, together with filter, access gantries, bucket elevator and truck loading facility all on an application site of circa 0.75 hectares located within Platin Cement Works. This application relates to an activity for which an Industrial Emissions Licence applies under the Environmental Protection Acts 1992 as amended. (IE Licence Register Number P0030-04) (Screening for Appropriate Assessment)
the development will consist of the demolition of the previously decommissioned Kiln 1, its associated preheater tower and related structures on an application site of circa 0.63 hectares located within Platin Cement Works. This application relates to an activity for which an Industrial Emissions Licence applies under the Environmental Protection Acts 1992 as amended (IE Licence Register Number P0030-04) (Screening for Appropriate Assessment submitted)
the development will consist of the installation of plant and associated structures, including a storage bay, intake hopper, conveyors, a 24.2m high stack and an electrical switch room all for the drying of granulated blast-furnace slag on an application site of circa 0.48 hectares located within Platin Cement Works (report for Screening for Appropriate Assessment submitted)
the development will consist of the installation of a waste heat recovery facility on Kiln 3 of the cement works. The development will include the fitting of 2 heat exchangers to Kiln 3 and the provision of cooling towers, a turbine/generator building and associated ancillary plant all on an application site of circa 3.0 hectares located within Platin Cement Works. This application relates to an activity for which an Industrial Emissions Licence applies under the Environmental Protection Acts 1992 as amended (IE Licence Register Number P0030-04). (An Appropriate Assessment Report has been submitted with this application)
a 10 year permission for development to allow for further progressive replacement of fossil fuels with lower carbon alternative fuels and to allow for the use of alternative raw materials in their Cement Works. To facilitate the on-site handling, storage, and introduction of the alternative fuels and alternative raw materials it is proposed to construct: a proposed extension to the existing Kiln 3 fine solids storage building (gross floor area of 489.72sq.m; maximum height 15.91m.), with truck unloading station and connecting covered bridge over; 3no. proposed pumpable fluids storage and handling tanks for Kiln 2 and Kiln 3 ( comprising 2no. tanks of 8.243m. diameter and 1no. tank of 5.00m. diameter; all tanks of maximum height 9.025m.), which are located within a concrete bunded area of c.21.064m. by 36.467m. by 2.0m. high; a proposed fine solids storage building for Kiln 2 (gross floor area of 2,517.46sq.m.; maximum height 8.15m.); a proposed fine solids introduction and metering building for Kiln 2 (gross floor area 44.66sq.m.; maximum height 2.80m. c.202.00cu.m.); with 2no. associated truck offloading stations (3.978m. by 7.501m. by maximum height 5.382m.) and associated conveyor; a proposed coarse solids offloading, buffer storage and conveying building for Kiln 2 (gross floor area of 287.10sq.m.; maximum height 30.50m.); with a proposed transfer station (gross floor area of 46.75sq.m.; maximum height 38.50m.) and associated conveyors; a proposed coarse solids storage and handling building for Kiln 2 and Kiln 3 (gross floor area of 4,875.00sq.m.; maximum height 12.15m.); a proposed coarse solids conveying building for Kiln 3 (gross floor area 287.10sq.m.; maximum height 30.50m.) and associated conveyor; 2no. proposed silos for storage and introduction of free-flowing solids for Kiln 2 (5.5m. diameter; maximum height 26.25m.; 254.34cu.m); 2no. proposed silos for storage and introduction of free-flowing solids for Kiln 3 (5.5m. diameter; maximum height 26.223m.; 254.34cu.m.); a proposed alternative raw materials storage building (gross floor area of 2,852.54sq.m.; maximum height 14.30.); a proposed bypass filter for Kiln 2, comprising a bag filter (c.15.672m. by 8.980m. by 21.45m. high) and a cooling tower (c.5.60m. diameter by maxumim height of 46.044m.), with truck loading point; 3no. fire-water retention tanks (9.6m. by 9.6m. external; maximum height 26.764m.)...etc. An Environmental Impact Statement has been submitted as part of the application.
a 20 year permission for development of a 13.5 hectare extension to its existing Overburden Management Facility (OBMF) on an overall site of 43.5 hectares, which includes the existing OBMF. The proposed extension will be limited to a height of 86m above ordnance datum, which is consistent with the height of the existing OBMF. The application includes for a new at-grade crossing of the existing Local Road L5612, and for the closing of the existing at-grade crossing together with associated site development, drainage, fencing, landscaping and other ancillary works. The application is accompanied by an Environmental Impact Assessment Report (EIAR). The application relates to a development which requires an Industrial Emissions Directive (IED) Licence and the facility operates pursuant to an existing IED Licence (EPA Ref No. P0030-05)
No Environment Impact Assesments Associated with this Application